Laptop Hdmi Video Working but Not Audi

The Loftier-Definition Multimedia Interface or HDMI supports uncompressed media streaming so that you tin view clearer pictures and hear sharper sounds. Furthermore, you can savour streaming video content with surround-sound audio back up and 4K content on your display monitor or Telly using just one cablevision. Moreover, you lot tin can simultaneously transmit digital video and sound from a TV or a computer to a projector or some other computer/Goggle box.

Some users complained that while the video content was being shared and viewed using HDMI, the audio was not accompanying the video. If you too are experiencing the same problem, you lot are at the correct place. We bring a perfect guide that will help you lot set up HDMI No Audio in Windows ten When Connected to the Tv effect. So, keep reading to learn how.

Fix HDMI No Sound in Windows 10 When Connected to Television set

Reasons behind 'HDMI Cable No Sound on Goggle box' Issue

There is a broad range of reasons behind the 'HDMI No Sound in Windows 10 When Continued to TV' issue.

i. It starts with the HDMI cable yous employ to connect to the computer, TV, or monitor. Plug the HDMI cablevision into another PC/TV and check whether you can hear whatsoever audio. If yep, then in that location is a problem with the monitor or TV you are projecting to. Y'all will need to configure information technology to receive HDMI.

2. If the audio upshot notwithstanding persists, it indicates a problem with the HDMI cable. Hence, try to connect with a new, operation cablevision.

iii. Sound issues with your PC can be caused by several reasons:

• Selection of the wrong audio driver or the incorrect playback device.
• Speaker Soundcard set up every bit default instead of switching the audio output to HDMI.
• Not configured to quantify and receive HDMI audio data.

Earlier moving forrard to solve the HDMI cable no audio on Telly problem, here is a list of basic checks to exist performed:

• Plug-in the HDMI cable properly. Make sure that the HDMI cable is not damaged or faulty.
• Ensure the Graphics Carte du jour (NVIDIA Control Panel) is configured correctly.
• NVIDIA cards (pre-GeForce 200 serial) do not support HDMI sound.
• Realtek drivers as well face up compatibility issues.
• Reboot the devices as a simple restart usually fixes minor problems & software glitches, near of the time.

Explained below are various methods that will aid you enable HDMI audio to send the audio to the TV. Read till the terminate to detect the ane that suits y'all.

Method 1: Set HDMI equally Default Playback Device

Whenever a PC has 2 or more audio cards installed, a conflict usually arises. It'southward quite probable that the HDMI audio output is non enabled automatically since the soundcard of speakers present internally in your estimator is being read every bit the default device.

Here's how to set up HDMI every bit the default playback device on Windows x PCs:

i. Go to the Windows search box, type Command Console and open it.

2. Now, click on the Sound section equally depicted below.

Note: Make certain to select "View by" as Large icons.

3. Now, the Sound settings window appears on the screen with the Playback tab.

four. Plug in the HDMI cable. It will be displayed on the screen with the proper name of your device. Refer given picture.

Note: If the device name does not appear on the screen, then right-click on the empty infinite. Check whether Bear witness Disabled Devices and Evidence Disconnected Devices options are enabled. Refer above motion picture.

5. Now, right-click on the audio device and cheque if it is enabled. If non, click on Enable, as shown.

vi. Now, select your HDMI device and click on Set Default, as shown beneath.

7. Finally, click Employ followed by OK to save the changes and exit the window.

Method 2: Update Installed Drivers

The device drivers installed on your arrangement, if incompatible, might trigger HDMI sound not working in Windows ten when connected to the Television receiver issue. Fix this problem quickly, by updating system drivers to their latest version

You can manually update your device drivers from the manufacturer'southward website. Discover and Download the drivers corresponding to the Windows version on your PC. One time downloaded, double click on the downloaded file and follow the given instructions to install it. Follow the same steps for all device drivers such as audio, video, network, etc.

You can also update device drivers through Device Manager:

1. Press Windows Fundamental + R then type devmgmt.msc as shown and clickOK.

2. Now, double-click to expand Sound, video and game controllers.

3. Now, right-click on the HDMI sound device and click on Update commuter, as depicted.

four. Click on Search automatically for drivers under How do you desire to search for drivers?

Note: Clicking on 'Search automatically for drivers' will allow Windows to search for the best bachelor drivers and install them on your calculator.

Method 3: Rollback the Graphics Drivers

If the HDMI had been working correctly and began to malfunction after an update, then rolling back the Graphics Drivers might assist. The rollback of drivers volition delete the current driver installed in the system and supervene upon information technology with its previous version. This process should eliminate whatsoever bugs in the drivers and potentially, fix HDMI No Sound in Windows 10 When Connected to TV issue.

1. Type Device Manager in the Windows search bar and open it from the search results.

2. Double-click on the Brandishadapters from the panel on the left and aggrandize it.

three. Right-click on your Graphics card proper noun and click on Properties, every bit depicted.

four. Switch to the Driver tab and select Roll Back Driver, every bit shown.

Note: If the option to Roll Dorsum Driver is greyed out in your system, it indicates that your system does not have the pre-installed driver files or the original driver files are missing. In this case, try alternative methods discussed in this commodity.

5. Click on OK to use this change.

6. Finally, click on Aye in the confirmation prompt and restart your system to make the rollback effective.

Also Read: How to Convert Coaxial Cablevision to HDMI

Method 4: Enable Sound Controllers

If the Audio controllers of your system are disabled, then the 'HDMI No Sound in Windows x When Continued to TV' issue will occur because the normal office of audio output swapping volition exist complanate. All the audio controllers on your device should be enabled, particularly when y'all have more than than 1 audio commuter installed.

Thus, you lot need to ensure the sound controllers are not disabled by post-obit these steps:

i. Open up Device Managing director equally explained in the previous method.

two. Now, click View >Bear witness hidden devices as depicted in the picture below. Move to the adjacent pace, if information technology is already checked.

3. Now, expand Organization Devices past double-clicking on information technology.

4. Here, search for the audio controller i.e High-Definition Audio Controller, and right-click on it. Then, click on Properties, every bit shown beneath.

5. Switch to the Driver tab and click on Enable Device.

Note: If the audio controller drivers are already enabled, an option to Disable Device volition appear on the screen.

6. Finally, restart the system to save changes.

Method five: Reinstall Sound Drivers

If updating the drivers or rolling back the drivers doesn't help set HDMI sound not working on Windows 10 result, its all-time to reinstall the audio drivers and get rid of all such issues in one-go. Here's how to practice so:

1. As instructed earlier, launch the Device Manager.

2. Roll down, search & so, aggrandize Sound, video and game controllers by double-clicking on it.

three. At present, right-click on the Loftier Definition Audio Device.

four. Click on Uninstall device as depicted below.

5. A warning prompt will appear on the screen. Click on Uninstall to continue.

6. Next, expand System Devices by double clicking on it.

7. Now, repeat steps three-4 to uninstall High Definition Sound Controller.

8. If you lot take more than than ane sound controller in your Windows arrangement, uninstall all of them using the same steps.

ix. Restart your organization. Windows will automatically install the latest drivers from its repository.

If this doesn't help fix HDMI No Sound in Windows 10 When Connected to TV issue, endeavor the adjacent solution.

Method 6: Utilise Windows Troubleshooter

Windows Troubleshooter is an extremely useful in-built tool that helps sort out several common issues with Windows calculator systems. In this scenario, the functionality of hardware components (sound, video, etc) will be tested. The issues responsible for such discrepancies will be found and resolved.

Notation: Make sure you log in every bit an administrator before proceeding.

ane. Hit the Windows primal on the keyboard and blazon troubleshoot, every bit depicted.

2. Click on Open from the correct pane to launch the Troubleshoot settings window.

3. Here, click the link for Additional troubleshooters.

iv. Next, click on Playing Audio nether the Become up and running department. Refer given pic.

5. Now, click on Run the troubleshooter as depicted below.

half dozen. On-screen instructions will be displayed. Follow them to run the troubleshooter and apply the recommended fixes.

7. Restart your system, if and when prompted.

Likewise Read: Fix Black Screen Issue on Samsung Smart TV

Method 7: Check the Television receiver/Monitor Sound Backdrop

E'er check and correct the TV/Monitor sound properties to make sure that the obvious requirements are being met. This includes ensuring proper seating of HDMI cable on its port, cable in working condition, TV non on mute and set to optimum volume, etc. Follow the below-mentioned steps to check the TV/Monitor sound properties:

one. Navigate to the Carte of Monitor or Goggle box.

2. At present, select Settings followed by Sound.

3. Ensure the audio is Enabled and audio coding is set to Automatic/ HDMI.

4. Toggle OFF Dolby Volume Mode every bit it's a tried & tested solution.

5. Now, gear up the Sound Range as any of these:

• Between WIDE and NARROW
• Stereo
• Mono
• Standard etc.

Note: Often, HDMI graphics bill of fare does not back up HDMI audio rather than HDMI video. In this case, the connection can be established by connecting the audio cablevision between the computer and the system.

Confirm if the HDMI audio not working on Television outcome is stock-still.

Method 8: Restart Android TV

The restart process of Android TV volition depend on the Television set manufacturer and device model. Here are the steps to restart your Android Television:

On the remote,

1. Press Quick Settings.

2. Now, select Restart.

Alternatively,

1. Printing HOME on the remote.

2. Now, navigate to Settings > Device Preferences > About > Restart > Restart.

Method ix: Use the Right HDMI Cable & Port

Certain devices have more one HDMI port. In such cases, ever ensure that you connect the correct pair of ports to the HDMI cable. Yous tin can opt to purchase adapters, if at that place is a mismatch between the HDMI cable and computer cable.

Recommended:

• HDMI Port Non Working in Windows 10 [SOLVED]
• Prepare HDMI Audio Not Working in Windows x
• Fix Media Disconnected Error on Windows 10
• Fix Caps Lock Stuck In Windows x

Nosotros hope that this guide was helpful, and you were able to fix HDMI No Sound in Windows 10 When Connected to TV. Permit united states know which method worked for you best. Also, if y'all have whatever queries/comments regarding this article, then feel gratuitous to drop them in the comments department.

DOWNLOAD HERE

Laptop Hdmi Video Working but Not Audi

Posted by: cutleruner1985.blogspot.com

Share this post